Titebond® WeatherMasterTM ULTIMATE MP Sealant is specially designed to perform better than all other types of sealants, including those containing VOCs, silicone, tripolymers and urethane.
Its adhesion strength is unbeatable on aluminum, painted metal, PVC, concrete, wood, masonry, vinyl, glass, plastic, steel, roofing paper in rolls and most common building materials including wallboard, cladding, flashing and sheet metal, including KynarTM and HylarTM 5000 coated sheet metal panels.
Titebond® WeatherMaster ULTIMATE MP Sealant adheres well to damp surfaces and forms a seal that resists water, wind, dust and dirt.
If touch-ups are necessary, it can be painted* using a water-based paint (latex paint) two hours after application. It extrudes easily at low temperatures (down to -18°C/0°F) and is UV resistant, making it an ideal choice for outdoor applications. It expands and contracts without cracking according to atmospheric fluctuations. It does not contain any solvents or isocyanates and complies with VOC standards.
- Performs better than silicone, tripolymer and urethane sealants.
- Applies easily in extreme weather conditions and forms a waterproof seal that remains flexible over time.
- Adheres securely to the most common construction materials, including KynarTM and HylarTM 5000 coated sheet metal.
- Resists UV rays and complies with VOC standards.
Recommended use:
Aluminum fenestration, Plastic, Wood fenestration, Vinyl/PVC fenestration, Metal, Glass, Various applications, Masonry, Wood, Concrete, Automotive, Vinyl
Base: Advanced patented polymer
Volume: 9.5 oz
Shaping time: 10 to 15 minutes
Standards and certifications: ASTM C920
This sealant is ideal for a variety of applications on roofs, gutters, metal and vinyl siding, windows, doors and vents. It forms an optimal flexible seal for recreational vehicles, semi-trailers and buses.
IMPORTANT INFORMATION
The ambient temperature, as well as that of the sealant and the surface, must not be lower than -18°C (0°F). WeatherMaster ULTIMATE MP sealant is designed for exterior use. If light colors are used indoors, the joint must be painted. Water-based (latex) paints can be applied two hours after applying the sealer. For any other type of paint, it is recommended to carry out a compatibility test. To form straight joints, mark the edge of the joints using masking tape. Always apply the product in the form of a bead. Once the sealer is applied, do not use solvent to wipe it off. When the sealant is dry to the touch, remove the masking tape. Use filler material if the joint is more than 13 mm (1/2 in.) deep. This product is not designed to be permanently submerged or used below the waterline. It should be stored below 24°C (75°F) and protected from humidity. Do not apply ULTIMATE MP Translucent on polycarbonate, which could crack under the effect of solvents. If you have any questions regarding the use of the product, call our help line at 1-800-347-4583 or visit us at titebond.com.
