Wood finisher - Barnwood effect

Barnwood effect gives an aged effect to the wood, makes it gray and brings out the grain. It is ideal for giving a graying effect on most woods, imitating barn wood that does not age over time. It can be used alone only on certain hardwoods and on white cedar (according to our tests) for other species, combine with the tannin activator. The activator accentuates the reactivity of the wood, modifies the color and considerably increases the effect. The shades obtained with Barnwood Effect vary according to the type of wood (ranging from brownish, gray, black and greenish) and the intensity of the shades can be adjusted by modifying the dilution ratio. Adding tannin activator increases aging and modifies the hue. It can be used on planed, brushed or raw wood.

Preparation:

The wood should be free of any finish. Apply activator as needed and let dry.

Dilution:

Dilute with water. The ratio can vary between 1 part of product for 5 to 30 parts of water, depending on the type of wood and the desired effect.

Shake the product well.

Application:

Apply by brush, roller, pad applicator, or spray. Wait at least 4 hours before applying the finish.

Finishing:

For the interior, use an oil, a wax or a varnish.

For the exterior, use Extéria oil from Ligna. The product raises the grain of the wood; sand lightly with a nylon pad or 220 grit before finishing.

The use of colored oil makes it possible to create very interesting superimposition effects.

Coverage:

100 ft2/litre of total product diluted [1:5] to [1:30]

Cleaning tools:

Water (natural bristle brushes tend to gray)

Sizes:

946ml

VOC:

0g/L

Precaution:

***Always do a test to establish the dilution ratio according to the desired effect.

***Wear gloves.

***Keep out of the reach of children.